をクリックすると実行します。ＢＡ分析機能／売買シグナル Box Analyzer Function によって、最大のＢＡ利益率が得られる最適化は、三種類のパラメーターを規定する 数値スピナー Number spinners 、移動平均（MOVING AVE）、ＢＡ平均（BA AVE）およびＢＡタグ（BA TAG）により設定されます。.
これら三種類の設定の組合わせは通常、１０８組となり、このうち最も高い売買利益率を出す設定をコンピューターが探します。（手動でも可能です）
銘柄を表示し、スクリーンの左下部にある最適化ボタンをクリックすると実行します。
このボタンは、下図の三種類の数値スピナーのうち、緑色の二つのボタンのいずれかあるいは両方がチェックされている時に作動可能となります。
もし分析中の銘柄のデータがＢＡマスク BA Mask 期間より短い場合、最適化は実行されません。
上記１０８組合わせは以下の通りです。（６ｘ６ｘ３＝１０８）
ＢＡ最適化ボタンの右隣には最適化機能調整ボタン
があります。これをクリックすると コンフィギュレーション・オプション･パネル Configuration
Options Panel が表われ、ここで好みの範囲（組合わせ）を設定することができます。
BA
Yield Optimizer Button
Determining
the optimum settings for the Box Analyzer Function, (in an effort to obtain the
highest BA Yield), we must rely on effectively using the three number
spinners
"Mov
Ave", "BA Ave", and "BA Tag".
Manipulating theses switches is a trial-and-error task. For convenience,
a BA Yield Optimizer Button is made available. It "optimizes"
these three switches to produce the highest simulated BUY/SELL yield.
The BA Yield Optimizer button is located in the lower left corner of Insider
TA's screen...
When
the BA Optimizer switch is "active":
The BA Yield
Optimizer Button requires that one or both of the following number spinners
are turned on:
・BA Ave number spinner
・BA Tag number spinner
If you click the BA Optimizer switch when neither of these switches are
enabled, Insider TA automatically enables all of them.
Also
note that if you configure the BA Mask's
begin
and
end boundaries to a condition that limits the number of "visible"
days, then clicking the BA Yield Optimizer button will not work (a message
box will pop up to report the reason).
When the BA Yield Optimizer Button is clicked, Insider TA performs calculations
on a range of MOVING AVE, BA AVE and BA TAG settings.
Sampling through every combination involves a great number of calculations.
Depending on the speed of the host computer, this may take a long time.
To reduce the processing time, only "reasonable" number spinner
ranges are sampled:
・The Mov Ave number spinner will sample values between 8 and 13.
・TheBA Ave number spinner will sample values between 8 and 13.
・The BA Tag number spinner will sample values between 4 and 6.
Note that you can also adjust these sampling ranges, using the "BA
Tuner" (explained below).
Controlling what gets
optimized:
Another time-cutting
measure allows you to control which of the three number spinners get sampled. This is accomplished
by the checkbox state of the respective switch. The following rules apply
to each of the three number spinners (Mov Ave, BA Ave, and BA Tag):
・If the number spinner is checked ON , then that switch is included in
the sampling process, using the range of values shown above.
・If the number spinner is unchecked, then its hosted value remains fixed
throughout the optimizing process.
Examples:
With all three number spinners checked, the BA Optimizer
will perform its most extensive set of sampling calculations (at the expense
of taking more time to complete).
Here, the MOV AVE switch is unchecked, so it will remain
fixed at 10 throughout the BA Optimizing.
With only the BA AVE switch checked, it is the only parameter
that will be sampled. The MOV AVE is fixed at 10, and the BA TAG is fixed
at 4.
With only the BA TAG switch checked, it is the only parameter
that will be sampled. The MOV AVE is fixed at 10, and the BA AVE is fixed
at 12.
Note: The above scheme pertains only when you are manually optimizing
the BA. It does not pertain to the BA optimizing that's performed during
a file
scan operation
(which
is activated with the Optimize BA After Load button in the Scan
Processing Panel).
When BA optimizing is conducted in file scans, all three parameters are
subjected to optimizing, regardless of the ON/OFF state of the above switches.
"Tuning"
the BA Optimizer:
To the right
of the BA Optimize button is the BA Tuner switch. When clicked,
it brings you to the "BA Tuner" tab page of the Configuration
Options Panel.
The BA Tuner lets you adjust the BA Mask
as
well as the sampling ranges performed during BA optimizing...
Copyright(c)1995-2006 Stock Blocks, Inc.